當前位置:
        首頁 > 產品中心 > 英國aim-tti > 直流電源 > QL564英國AIM-TTI直流穩壓電源
        產品展示Products
        QL564英國AIM-TTI直流穩壓電源
        QL564英國AIM-TTI直流穩壓電源
        型    號:
        所屬分類:直流電源
        報    價:
        分享到:

        QL564英國AIM-TTI直流穩壓電源
        QL564英國TTI直流穩壓電源:The QL Series II is the latest and highest performance linear regulated power supply series from TTi. Single 0-56V/0-4A * 單輸出

        QL564英國AIM-TTI直流穩壓電源產品概述:

          深圳市深東金儀器有限公司早在1996年香港成立香港東金電子有限公司,在2006年10月28在深圳成立深圳市福田區華強廣場東金電子儀器經營部,從事電子儀器行業20年,我們以銷售電子測量儀器儀表為主要業務,為客戶提供較早型、高品質的測試儀器。并以合理的價格、完善的售前及售后服務,使客戶得到平等、互惠的對待。我司的銷售人員擁有多年從事儀器行業銷售的工作經驗,能為您們提供專業的意見和分析,我們擁有豐富維修經驗豐富的工程師為您們提供技術支持與技術培訓;可以更快捷地幫客戶解決測試方面的問題。同時我公司也系統集成方案的供應商,曾為多家大型上市公司設計中央系統集成方案也很好地解決了客戶長期解決不了的生產測試難題,也更節省了生產的成本;也在行業中樹立了良好的口碑。

               深圳市深東金儀器有限公司主營:數字/模擬電視中央信號源、CMMB信號源/發生器/發生卡、電視信號發生器、示波器、音視頻分析儀、安規測試儀、EMC測試儀、LCR測試儀、GPS信號發生器,HDMI高清信號源,彩色分析儀,DMB-TH/DVB-T/ATSC/ISDB調制器與功率放大器、示波器電源等儀器;

        主營的品牌有:西班牙Promax、美國力科(LeCory)、美國安捷倫(是德)KEYSIGHT)、德國偉視(WISI)、日本橫河(Yokogawa)、中國臺灣固緯(GWinstek)、日本菊水(KIKUSUI)、日本營電(EIDEN)、日本LEVEAR,

        日本菊水KIUSUI、英國Aim-tti、PicoTechnology英國比克科技 ;同時我公司還有自主品牌寶碼(Pro-instrument)是我司穩步發展的動力.

             我們秉承“顧客至上,銳意進取”的經營理念,堅持“客戶率先”的原則為廣大客戶提供優質的服務和更好的測試方案,客戶的滿意就是我們前進的較大動力。所以在互聯網發展迅猛的今天,我司在立足深圳,放眼世界,將我們的品牌服務做強做大,為客戶更好地服務。您的滿意就是我們前進的較大動力。

        深圳市深東金儀器有限公司33217630  33217631

         

        QL564英國TTI直流穩壓電源的主要介紹

        QL564英國AIM-TTI直流穩壓電源

        QL564英國AIM-TTI直流穩壓電源

         Single 0-56V/0-4A  * 單輸出

        The QL Series II is the latest and highest performance linear regulated power supply series from TTi.

        Single and triple output models are available.  Each model can be specified with or without digital remote control interfaces.

        Each main output provides more than 100 watts of power, and dual range capability offers higher currents at lower voltages.

        New features include an enhanced auxiliary output with fully variable voltage and higher current capability on T models, and an LXI compliant LAN interface on all P models.

         

        Despite the improvements in high frequency switcher design, Linear regulation still offers the lowest output noise and the best transient response (recovery time from a sudden current step).

        It also offers the most benign stability characteristics when driving complex load conditions.

         

        Ultra-low noise
         

        Most linear regulated power supplies offer low output noise with figures below 2mV rms being typical.

        The QL series goes a stage further with an RMS noise figure of 0.35mV and tightly specified pk-pk noise.

        Many higher power linear regulated designs include a line frequency switched pre-regulator.  Whereas this may not compromise differential output noise, it significantly increases common mode noise currents.

        The QL Series uses true linear regulation without any line frequency switching regulation.  Consequently it offers exceptional common mode noise levels of <4uA rms at 20MHz bandwidth.

        QL564英國TTI直流穩壓電源的主要介紹

        Higher Currents at Lower Voltages
         

        The QL series provides multiple ranges for increased current capability at lower voltages.

        For the QL355, the main range offers 0 to 35 volts at up to 3 amps. The higher current range provides up to 5 amps for voltages up to 15V.

        The QL564 has a main range of 0 to 56 volts at up to 2 amps. The higher current range provides up to 4 amps for voltages up to 25V

        On both models, a further low current range provides an enhanced current setting and measurement resolution of 0.1mA.

         

        Voltage and current are controlled using instrumentation quality 16 bit DACs enabling voltages to be set to 1mV resolution even at full output.

        Indeed, the accuracy is sufficient for the QL to be used as a calibration source for some hand-held DMMs.

         

        Why do I need a precision PSU ?
         

        Every engineer needs to have confidence in their equipment. A power supply is one of the most fundamental of bench instruments.

        You need certainty that the voltage you apply to a circuit is precisely what you want it to be.

        You need certainty that the output of your power supply is clean and stable.

        You need the ability to define a precise voltage at the load and maintain regulation independent of lead resistances.

                 
         
              
         
        Unmatched precision
         

        The QL series offers an unparalleled level of precision. Voltage and current are controlled using instrumentation quality 16 bit DACs enabling voltages to be set to 1mV resolution even at full output.

        Indeed, the accuracy is sufficient for the QL to be used as a calibration source for some hand-held DMMs.

         

        Why do I need a precision PSU ?
         

        Every engineer needs to have confidence in their equipment. A power supply is one of the most fundamental of bench instruments.

        You need certainty that the voltage you apply to a circuit is precisely what you want it to be.

        You need certainty that the output of your power supply is clean and stable.

        You need the ability to define a precise voltage at the load and maintain regulation independent of lead resistances.

        留言框

        • 產品:

        • 補充說明:

        • 您的單位:

        • 您的姓名:

        • 聯系電話:

        • 常用郵箱:

        • 詳細地址:

        • 省份:

        • 驗證碼:

          請輸入計算結果(填寫阿拉伯數字),如:三加四=7
        在線客服
        用心服務成就你我

        化工儀器網

        推薦收藏該企業網站
        精品国产,网曝门,99热这里只有精品国产,中美印度亚洲欧美综合,国产在线观看无码专区,最新国自产拍视频在线播放,春色都市亚洲小说区,欧美午夜福利不卡片
        掃一掃訪問手機站掃一掃訪問手機站
        訪問手機站